nav_sec3_new.jpg (651 bytes)
Description   |   Features   |   Size   |   Outputs   |   Specifications   |   Mechanical

SNP-Z309
300W U-Channel with Active PFC

View Specifications in PDF Format
300W U-Channel with Active PFC
300W U-Channel with Active PFC

 

Description Go to top


Skynet`s new SNP-Z3 series packs 300W of high efficiency power in a 1U package while maintaining excellent thermal performance. This is made possible by Skynet`s patent pending soft-switching topology which offers up to 87% efficiency in an offline (AC-DC) switcher!

Features Go to top

• 300W Continuous output power in a 1U form factor
• Up to 90% efficiency!
• Active power factor correction
• Meets IEC-1000-3-2 harmonics
• EMI: EN55022 Class B
• Safety UL 60950; CSA 22.2 No. 234; EN60950

Size Go to top

5 x 9 x 1.6 inch
127 x 228.6 x 40.6 mm

DC Outputs Go to top

Output+24V+5V
Max Load12A / 15A pk.2A
Regulation±1%±1%
Ripple200mV50mV

Specifications Go to top
View Specifications in PDF Format

Input VAC
Voltage, V 90-264 continuous
Frequency, Hz 47-63
Current, A 8A @ 120V / 4A @ 240V
Power Factor 0.95 minimum at max load
Harmonics EN61000-3-2
Cooling convection cooled
Power Good TTL compatible
Holdup Time 20ms, nominal line, full load
Transient Return to 1% in 1ms, 20% load step at 0.5A/us slew rate
Efficiency 68% at full load, typical
Shorted output No damage
Over Load Protection Auto-recovery
Short Circuit Protection Auto-recovery
Over Voltage Protection Latch off
EMS EN61000-4-2,-3,-4,-5,-6,-8,-11
Temperature 0 to 50 degrees C
EMI EN55022
Safety Agency UL 60950

Notes
Go to top
1. The total output current is rated load with free air convection and maximum load.
2. Each output is checked at the factory to be within voltage accuracy with a 60% rated load condition.
3. Line regulation is defined by changing the input voltage ±10% from nominal line at rated load.
4. Load regulation is defined by changing the output load ± 40% from 60% of the rated load while another output is set to 60% of rated load.
5. Ripple & noise is measured at rated load and nominal line by using a 15MHz bandwidth limited oscilloscope with each output terminated by a 0.47 uF capacitor.
6. Hold up time is measured from the end of the last charging pulse to when the main output drops down to 95% output voltage.
7. Efficiency is measured at rated load.

 

Mechanical Go to top

 

 

Click here to view a printer friendly mechanical drawing.
300W U-Channel with Active PFC
Return to product index

The information and specifications contained in this data sheet are believed to be accurate at the time of publication. If errors are found, they will be corrected. Consequently, specifications may be subject to change without notice.

Home  l   Products  l  Support   l  Sales  l  About Us  l  Contact Us  l  Site Map

nav_sec3_new.jpg (651 bytes)
eUrasia Power,  © 2006, All Rights Reserved
Send email to
for questions or comments about this website.
Last modified: February 15, 2006